ZXF20 Watch Anti Theft Display Stand

1.Introduction ZXF20 watch anti theft display stand

ZXF20 Smart Watch Anti Theft Display Stand consists of alarm host, alarm probe, display stand and so on. The ZXF20 is suitable for a variety of different brands of smartwatches for display and anti-theft needs, such as apple watch, samsung watch, huawei watch,etc.

The ZXF20 watch anti theft display stand alarm host is installed on the display rack or display case, and the alarm probe is adhered to the display products. Customers can easily take down the display products from the shelf, free to the function and appearance of the smart watch for operation.

If the customer wants to take away the smartwatch, the alarm host will immediately send out a continuous alarm sound, which at least 110dB. the alarm will continue unless the manager reset it.

2.Parameter of ZXF20 watch anti theft display stand

The size of ZXF20 watch anti theft display stand is 111mm×57mm×40mm, weight is about 155g, built-in lithium battery capacity is about 250mAh, charging voltage and current are 5V and 1A respectively, standby time is up to 48 hours. The material of the alarm host is chosen from Acrylic+Flanne+ABS combination, the maximum alarm volume can reach 100~110dB, and the infrared remote control is used to control the ZXF20 host. Available colors are black and white.

3.Installation of ZXF20 watch anti theft display stand

There are 6 steps to install the ZXF20 watch anti theft display stand：

• 1. Wipe the desktop completely;
• 2. Spread the double-side tape on the bottom of the alarm and press down for more than 10 seconds to make the alarm completely stick on the desktop;
• 3. Tear off the double-side adhesive tape of the spring wire sensor, stick it the middle of the back of the dial, buckle the strap(for straps with holes, make sure that the sensor switch avoids the position of the hole), and tighten the screws;
• 4. When the sensor line is inserted into the alarm, the alarm emits a beep sound, and the blue indicator lights of the alarm host and the sensor line flash, and the alarm insert it into the bracket from the left, and place the dial in the middle position;
• 5. Connecting the external power supply, the two blue indicator lights are always on, and the alarm enters the working state at the time;
• 6. When an alarm occurs, use the remote control to aim at the position of the indicator light within 3cm in front of the host to unlock.

4.Application of ZXF20 watch anti theft display stand

ZXF20 watch anti theft display stand can be applied in many scenarios, such as: smartwatch stores, shopping malls, supermarkets, digital hypermarkets, and so on. Some of the application scenarios of ZXF20 are given below:

In addition to the ZXF20 Watch Anti Theft Display Stand, ZHAOXIAN has a variety of other styles of smartwatch security display.

In addition to the hardware anti-theft measures，If your smart watch has been stolen, then you can also try to find the manufacturer of the smart watch to offer some compensation for the loss (if you had buy the lost insurance), such as Apple’s products“AppleCare+ with theft and loss”.

Product name	Smart watch anti theft display stand
Model No.	ZXF20
Color	Black/White
Power Supply	5V/1A
Alarm Volume	100~110DB
Remote	Infrared Remote Control
Sensor Type	Band bracket switch sensor
Function	Apple Watch, Samsung watch, and Huawei watch security display with charging function